安徽快3

          CN / EN
          Station application solution
          Addtime:2018-12-12

          Product needs and challenges

          The generator set used on the railway (bureau) is mainly used for machine repair and emergency measures. ATS function, AMF function, low noise, stable performance, support the normal operation of the train station.

          1, low working noise

          Ultra-low noise, ensuring peace of mind for railway personnel in a quiet enough environment, while ensuring that passengers have a quiet waiting environment.

          2. Main and necessary protective devices

          In the case of the following faults, the unit will automatically stop and send out corresponding signals: low oil pressure, high water temperature, overspeed, unsuccessful start, etc.

          The unit start mode is selected as the automatic start mode. The unit must have AMF (automatic mains failure) function, equipped with ATS, to achieve fully automatic start. When the mains power fails, the starting time delay is less than 5 seconds (adjustable), the unit can be started automatically (there are three consecutive automatic starting functions), and the mains/units have a full negative switching time of <10 seconds, which fully meets the time required for the input load. Less than 12 seconds, after the mains recovery, the unit maintains 0-300 seconds of operation and then cools (adjustable) automatically.

          3, stable performance, strong reliability

          The average failure interval of the unit is not less than 2000 hours;

          In terms of technical performance, the no-load voltage setting range of the unit is 95-105% of rated voltage.

            solution

          The general railway station is composed of two power sources, one is the mains, and the second is equipped with some diesel generator sets to deal with sudden power outages. The generator set is required to have the AMF function, equipped with ATS, to ensure that once the main power supply is cut off, the alternative power supply system must be able to provide power immediately, with low noise and stability to meet the special requirements of the railway station. It is equipped with RS232 or RS485/422 communication interface to realize connection with computer, remote monitoring, remote control, remote communication and telemetry, and it is fully automatic and unattended.

            Advantage

          · A full set of products and solutions to reduce the user's mastery of the technology, making the use and maintenance of the unit easier and easier;

          ·The control system has AMF function, it can be started automatically, and there are many automatic shutdown and alarm functions under monitoring;

          ·Optional ATS, small unit can be used with built-in ATS;

          · Ultra-low noise power generation to meet the needs of daily life;

          ·The performance is stable, and the average fault interval of the unit is not less than 2000 hours;

          ·The unit is small in size and can be equipped with some devices to meet the requirements of operation in cold regions and high temperature areas;

          · Special needs for some customers can be custom designed and developed.

          咨询热线
          021-59815156
          QQ交谈

          扫一扫

          安徽快3

          安徽快3